Showing all 15 results
The cladding pictured here is a component in the Frameless glass balustrade system. This cladding slots over the Cladding Rubber Gasket, which can be purchased separately here.
The Cladding Rubber Gasket is suitable for attachment to a Aluminium Channel Shoe, these tubes are sold in 1m lengths.
The Drain Block seen here is an aluminium base Drain Block measuring gat 63.5 x 63.5 x 2.0, and is used below the channel tube to allow water to drain.
This 90° Corner Base is an aluminium base corner measuring at 150mm x 150mm as outside dimensions.
The Aluminium Channel Shoe seen here is part of our Frameless Glass Balustrade System. This product is available with two types of construction including, 12mm and 15mm channels that are suitable for all Frameless glass panels. This Aluminium channel shoe is sold in 3 metre lengths as standard.
The Toughened Laminated Glass Panel listed here is specifically for the Frameless Glass Balustrade system. It measures 1000mm wide by 1080mm high to fit Frameless Balustrade range.
The slotted handrail listed here is made from Grade 316 Stainless Steel, allowing it to be used in external areas. It is supplied in 3 metre lengths and has a 42.4mm diameter with a 1.5mm thickness.
The Toughened Glass Panel pictured here is only suitable for the Frameless balustrade system. Its measurements are 1080mm high by 1000m wide with a variety of thicknesses including 12mm and 19mm.
Frameless Glass Balustrade 1 metre straight run.
The Isolator Grip seen here is a 2 part panel. Grip isolators are used within the channel to lock the glass into position. 1 part is to be either side of the glass directly opposite the other.
The Rubber Gasket slots over the Glass to secure the top rail of the Frameless Glass Balustrade system, the rail is sold in 1m lengths.
The Slotted End Cap is used for the capping of handrails that do not require fixing to a wall. We provided Slotted end Caps for the Frameless glass Balustrade system.
The Slotted Horizontal Elbow seen here is exclusive to the Frameless Glass Balustrade system. The Elbow is manufactured to suit a 42.4mm x 1.5mm tube, and is used to connect 2 pieces of handrail tube horizontally.
The Slotted Wall Flange seen here is provided for the Frameless Glass Balustrade system.
The Square Rubber Gasket seen here is suitable for placement in the aluminium Channel shoe, these are sold in 1m lengths.